Short horizontal black line on a white background

GARAGE DOOR REPAIR

A typical two-car steel garage door often weighs 150 pounds or more, and when a spring, cable, roller, or hinge fails, that weight shifts onto parts never designed to carry it, which is how one small failure quickly damages the opener, tracks, and panels. Homeowners and business owners from Sonoma, CA to the far corners of Napa, Sonoma, and Marin Counties call Sonoma Overhead Doors and Gates for garage door repair. We diagnose noisy, sagging, crooked, stuck, and slow doors, then repair springs, cables, tracks, rollers, hinges, panels, seals, and openers, restoring balance so the whole system stops straining and runs smoothly and safely again.
Two workers in hard hats crouch on a rooftop, working on the roof structure under a cloudy sky.
Person carrying wooden planks on a rooftop under a blue sky

HONEST DIAGNOSIS COMES BEFORE ANY REPAIR.

A door that jerks or grinds can have several possible causes, and guessing wrong wastes your money. We inspect the entire system before recommending anything, checking spring balance, cable wear, track alignment, roller condition, and opener settings. Then we explain what failed, why it failed, and what else might be close to failing, so you can make a clear decision without pressure.


You approve a flat-rate price before we touch a tool, and because our trucks carry the parts that fail most often, most repairs are finished during the same visit without a second trip.


✓ Full-system inspection first

✓ Plain explanation of the cause

✓ Flat-rate price before work starts

✓ Most repairs completed same visit

Black horizontal line on a white background
GARAGE DOOR REPAIR

FIXES THAT HOLD UP LONG AFTER WE DRIVE AWAY.

Anyone can make a stuck door move for a day. Our focus is repairs that last. That means replacing worn parts with quality components, correcting the underlying imbalance or misalignment that caused the failure, and testing the door through repeated cycles. Our trucks carry common springs, cables, rollers, and hardware, which lets us finish most jobs on the first visit rather than leaving you waiting for parts to arrive days later.
REPAIRS SHAPED BY FOG, HEAT, AND HILLSIDE GARAGES.
Local conditions explain many of the breakdowns we see. Fog and salt air around Marin rust springs, cables, and bottom brackets faster than inland areas. Dry summer heat in Sonoma and Napa hardens weather seals and dries out lubrication. Hillside homes with sloped slabs put uneven stress on tracks and rollers. Understanding those patterns helps us repair the door properly and suggest small changes that prevent the same problem from returning.
THERE IS NOT MUCH ON A GARAGE DOOR WE HAVE NOT FIXED.
Across 25+ years of North Bay service calls, we have repaired doors knocked off their tracks by cars, panels crushed by delivery trucks, springs snapped on frosty mornings, and openers fried by power surges. That breadth of experience means faster diagnosis and fewer return visits for you. We recognize the sounds and symptoms quickly, and we fix the cause instead of patching the symptom. Is your door making a noise that has you worried?
WHAT A PROFESSIONAL REPAIR DELIVERS
Black outline of a garage with a closed roll-up door on a white background
Restored Daily Convenience
A door that opens on the first press again removes a small but constant frustration. Leaving for work and pulling in after errands becomes routine instead of a daily struggle with a stubborn door.
Black-and-white icon of a garage with a closed roll-up door
Protection From Bigger Failures
Fixing a frayed cable or weak spring early prevents a sudden drop, a crushed panel, or a burned-out opener motor. Timely repairs often save you from a far larger bill later.
Black-and-white icon of a garage with a roll-up door, shown front view
Safer Operation for Everyone
Balanced springs and working safety sensors reduce the chance of a door falling or closing on someone. Your family, guests, and pets can move through the garage without worry.
Black line icon of a garage with a roll-up door
Lower Long-Term Costs
Correcting the root cause means fewer repeat service calls. Extending the life of your current door and opener also postpones the cost of replacement for years in many cases.
Black outlined garage with a closed roll-up door and small upper window
A Quieter, Smoother Door
New rollers, lubricated hinges, and a rebalanced system eliminate most squealing, grinding, and banging. The door returns to a smooth, steady motion that barely registers in the house.
Black outlined garage with closed roll-up door and pitched roof icon
Clear Answers Without Pressure
You understand exactly what was wrong and what we did about it. If replacement ever makes more sense, we explain why honestly and leave the decision entirely in your hands.
Thin black horizontal line on a white background

our services

OUR GARAGE DOOR REPAIR WORK

Most garage door problems trace back to a handful of components. These are the repairs we handle most often for North Bay homeowners and businesses, usually completed during the very first visit.
Person carrying wooden planks on a rooftop under a blue sky
Broken Spring Repair
SPRING WORK
Snapped or weak torsion and extension springs leave a door heavy or immovable. We replace springs sized to your door weight, reset balance, and inspect the surrounding hardware for related wear.
Two workers in hard hats repairing a shingled roof under a cloudy sky.
Cable and Drum Repair
CABLE FIXES
Frayed, slipped, or broken lift cables let one side of the door drop and bind. We install new cables, reseat them on the drums, and level the door so it travels evenly again.
Two roofers wearing hard hats work on a shingled roof, one kneeling and one leaning forward.
Off-Track and Bent Track Repair
TRACK REPAIR
Doors knocked off their tracks or running in bent rails need careful correction. We realign or replace track sections, reset the rollers, and secure every bracket so the door stays on course.
House roof with steam or smoke rising from a damaged section near the gutter
Roller and Hinge Replacement
ROLLER SWAPS
Cracked rollers and worn, loose hinges cause grinding, shaking, and uneven travel along the track. We replace them with quieter, longer-lasting hardware and lubricate moving parts while the door is being serviced.
Two workers on a shingled roof, one kneeling with a hammer and one sitting nearby under a cloudy sky
Damaged Panel Repair
PANEL FIXES
Dents, cracks, and bent sections weaken a door and spoil its appearance. Depending on the damage, we reinforce, straighten, or replace individual panels to restore a straight, sealed door face.
Snow-covered rooftops under a clear blue sky
Opener and Sensor Repair
OPENER TROUBLE
Doors that reverse unexpectedly, hum without moving, or ignore remotes usually have opener or sensor faults. We diagnose wiring, logic boards, gears, and photo eyes, then repair or recommend replacement.
Black horizontal line on a white background

Real Reviews · Real Customers

WHAT OUR CLIENTS SAY.

Repair customers usually call us on a stressful day. Their reviews describe technicians who arrived quickly, diagnosed the issue in minutes, explained it clearly, and had the door working again within an hour or two. See what they have to say about the experience.

★★★★★

White screen with a small multicolor Google “G” logo in the top-left corner

I am so happy with the service and the garage doors that we purchased from Sonoma Overhead Doors. Marty was so knowledgeable on the different products and helpful. We had the panels custom painted to match the house.



The motors are so quiet that you hardly hear them. I couldn't be more pleased with this company and would recommend them to anyone.

Shelley L.

★★★★★

White screen with a small multicolored Google “G” logo in the top-left corner.

This company installed my garage door and opener originally in 2004, They have helped me to service the door and recently installed a new opener. Prompt, courteous, and they do their job with a minimum of disruption to your lifestyle. I would recommend this company to anyone.

Eric V.

★★★★★

Google “G” logo in the top-left corner on a white background

Very happy! They were able rectify an install that was incompatible with existing equipment and provide competitive pricing for a new unit and install. The installer was even able to have the unit welding mesh with the existing design.

Aurora B.
Black horizontal line on a white background.
FAQ

FREQUENTLY ASKED QUESTIONS.

A broken or noisy garage door raises urgent questions. These answers explain common problems, what causes them, and when a repair is safe to wait on or needs attention right away.

    Why is my garage door so loud when it opens?

    Worn rollers, dry hinges, loose hardware, or an unbalanced spring usually cause excessive noise. Grinding often points to rollers, while banging suggests loose sections or springs. A tune-up or targeted repair typically quiets the door considerably.


    Why does my garage door open partway and stop?

    Common causes include worn springs that no longer balance the door, obstructions or bends in the track, misadjusted travel limits, or an opener struggling with too much weight. A balance test usually reveals the culprit quickly.


    Can I fix my garage door myself?

    Simple tasks like cleaning photo eyes, lubricating hinges, and tightening loose bolts are fine. Springs, cables, and bottom brackets hold dangerous tension and should always be handled by trained technicians with the right tools.


    Why is my garage door crooked when it closes?

    An uneven door usually means a cable has slipped or frayed, a drum has loosened, or one spring is weaker than the other. Stop using the opener, since continued operation can bend tracks or panels.


    How long does a typical garage door repair take?

    Most repairs, including spring and cable replacement, take one to two hours. Multiple failed parts, bent tracks, or panel replacements can take longer, and we give you a realistic time estimate after diagnosing the door.


    Is it worth repairing an older garage door?

    Often, yes. If the sections are solid and only hardware has failed, repair is usually the economical choice. When panels are rusting through or multiple major parts are failing together, replacement may offer better long-term value.


    Does Sonoma Overhead Doors and Gates repair all brands of doors?

    Yes. Sonoma Overhead Doors and Gates repairs residential and commercial doors from most manufacturers across Sonoma, CA and the North Bay, carrying common springs, cables, rollers, and hardware on our service trucks.


    Why call Sonoma Overhead Doors and Gates for garage door repair?

    Speed and honesty. Sonoma Overhead Doors and Gates pairs 25+ years of repair experience in Sonoma, CA with same-day scheduling when available and technicians who fix the root cause rather than the symptom.


    Black horizontal bar on a white background.
    HOW WE WORK

    FROM FIRST CALL TO FIXED DOOR, HERE IS HOW.

    LEARN MORE →

    LEARN MORE →

    LEARN MORE →

    LEARN MORE →

    Step-01

    WE LISTEN TO THE SYMPTOMS
    When you contact us, we ask what the door is doing, when it started, and any sounds you noticed. Those details help us arrive prepared with the most likely parts already loaded on the truck.

    Step-02

    WE INSPECT THE WHOLE DOOR
    Our technician checks springs, cables, drums, tracks, rollers, hinges, panels, and the opener. We run a balance test and watch the door cycle several times, confirming the real cause rather than guessing.

    Step-03

    WE EXPLAIN YOUR OPTIONS
    You get a clear explanation of what failed, why it failed, and what it will cost to fix. If other parts are close to failing, we point them out and let you decide how to proceed.

    Step-04

    WE MAKE THE REPAIR
    Once you approve the flat-rate price, we replace or repair the failed components using quality parts. Tension is handled safely, and surrounding hardware is tightened and adjusted along the way for lasting results.

    Step-05

    WE REBALANCE AND ADJUST
    After the repair, we rebalance the springs, level the door, and fine-tune opener force and travel limits. These adjustments keep the new parts from wearing prematurely and protect the opener from unnecessary strain.

    Step-06

    WE TEST BEFORE LEAVING
    The door runs through several complete cycles while we check reversal, photo eyes, and smooth travel. We share simple tips to keep it running well and answer any questions before we leave your property.